A smoothing reactor is connected in series with the DC high voltage line as either part of the converter station or back-to-back interconnection between different transmission networks. It reduces the harmonic current [ripple], limits the inrush current during fault conditions, limits the DC phase current rate of rise and improves the dynamic stability of the power system.
OPERATING CONDITIONS
Location: indoor or outdoor
Ambient temperature: -40℃~+50℃ (according to customer’s requirement)
Altitude: ≤3000m (according to customer’s requirement)
Maximum wind speed: 45m/s (according to customer’s requirement)
Relative humidity: ≤90%
Seismic capacity: horizontal 0.30g (according to customer’s requirement)
Vertical 0.15g (according to customer’s requirement)
Note the type of ventilation when using indoor.
Installation location must be clean, no harmful gas, steam, electric conductivity and explosive dust.
Note: If you have any special requirements, please directly contact TEEE, we sincerely wish to meet your requirements. We provide world-class smoothing reactor products business in Michigan, Virginia, Oregon, North Carolina, California, New York, Georgia and Washington areas.
PARAMETER
System voltage
Rated voltage
The highest running voltage
Rated reactance value
Rated dc current
The maximum dc current
Harmonic current
Type of Insulation
Temperature class of the insulation
Rated loss
The average temperature rise
Hot spot temperature rise
Sound level
Location: indoor or outdoor
Installation method and terminal bus bar orientation
PK series dry air core Smoothing Reactor
